After the Chetuo Home website was launched, he began to pay attention to this website. This website launched several special topics in succession, all of which were very interesting. It can even be said that the topics in each issue are very novel. They are all promoted or judged by a product from an angle that everyone has never seen before.?...

Now this website has set a precedent, which is to introduce an automobile factory from the most basic aspect, and it is also a domestic automobile factory. This entry point is very novel.

Even today, when automobile culture and knowledge have begun to become slightly popular, there are still many consumers who do not understand how a car goes from the production line.

However, this article starts with this perspective, unveiling the mystery that has been hiding ordinary consumers in the past, allowing the consumer group to understand how a car is produced and manufactured from the most basic perspective, which makes many people feel very novel.

At the same time, in the backend of Chetuo Home website, the technicians were applauding the rising click-through rate, and the plan was successful again.

"When you make a car, the first step you have to do is to open the steel plate, stretch, then stamp, and finally cut into molding. In Chenhua Automobile's production workshop, we see the 10,000-ton stamping equipment from Shule, Germany. This equipment is very sharp and the equipment is very advanced. It uses a 6-sequence servo motor to control it, and can complete the work of entering thousands of stamping workpieces within an hour, and the fastest speed can reach 17 stamping times per minute. The production efficiency is currently used by mainstream domestic car companies in China.

Three times the preparation, and the accuracy is higher. According to our understanding, this large stamping equipment is the top-level product globally, and in China, it is undoubtedly the top-level. As far as the author knows, at present, such stamping equipment is the first set, and the second set in the future will appear in another joint venture car company in the provincial capital, the joint venture factory of BMW in the provincial capital. Even German companies like Volkswagen have not yet used such advanced equipment in China..."

When he saw this, Mo Xiaobei couldn't help feeling a little shocked. If it weren't for the clean and extremely silver-looking high-end equipment in the clean and unusual stamping workshop in front of him, he would definitely not believe that such a world-class equipment would have appeared in a workshop of an unknown factory in China. However, it also makes people feel more at ease. Such a company can actually have such high-end equipment, so how can the products produced by this company be reborn 800 years later?

Although I don’t know what the models produced by this factory look like, everyone’s appetite has been lifted up. Just looking at the equipment they own, everyone has reason to believe that the factory is not the same as Geely or Chery.

You should know that the stamping production lines they use, both in terms of efficiency and accuracy, are currently top in China. Even BMW plans to use such equipment.

Doesn’t that mean that this car can be of the same level as BMW, just like this body frame?

Of course, this is a bit of a distortion of concepts, but Chinese people like Lenovo this way, especially when a product has a little bit of a margin with an internationally renowned brand.

Many people who were originally not interested in Chenhua Auto could not help but cheer up and continue reading.

"After the stamping is completed, various workpieces will be placed on the conveyor belt and entered the quality inspection workshop. Here, the quality inspection personnel will test each workpiece. Here, I have to admit that the quality inspection personnel used in this factory are definitely the most professional among all automobile manufacturing companies in the country so far. First, they will test the flatness and smoothness of the workpiece surface. After all, they will enter the next step, that is, use a shrinking ruler to test the thickness of the workpiece, and then use a vernier caliper to check the size of the process hole, etc., a series of complex and strict inspections. Finally, the products detected are divided into three types: reworking of the parts, qualified parts, and scrapped parts. Then each inspector will mark their work number on the products they inspect so that the product quality reports will be traced in the later stage. With such a strict quality inspection system, I believe that the quality of the products they produce will be very good..."

This reporter has reported a lot of reports on the subsequent series of quality monitoring systems, a series of photos and text introductions, which can't help but make people feel inexplicably trust and favorable to this automobile factory.

This is the first time that this factory has encountered such an open external publicity. Such a bright and tidy factory has already made people feel good about it. Coupled with such a strict quality inspection system, it makes people feel more confident in this factory. The prince said that she was not married.

"After the whole vehicle plate and profile stamping are stamped, we will see that the workpieces that are qualified to be stamped will be sent to the welding workshop behind by the automatic conveyor belt. In the welding workshop, we were shocked, because we have never seen so many automated welding robots in any domestic automobile production factory. During the entire welding process, we did not even see a worker. The entire welding, more than 5,800 welding points in the whole vehicle, about 97% will be completed by robots. Such high automation productivity can be said to be the only one in the country. With the author's experience in this industry for so many years, the production efficiency of automated welding installation in this way seems to be

Only the BMW production line in Bremen, Germany can be completed. According to the information I found out, the 600 welding robots used in this factory are like BMW. They purchase the highest-grade robot welding production line from ABB in Europe. Such production equipment is all similar to the top international products, which is particularly impressive. Although we have not seen their terminal products at this time, I am already very curious about their products and even feel a little impatient. After all, the products produced by using such high-end equipment and are also a domestic car. What level can it reach? It is very exciting."

When many readers see this, just like the author of this article, they are full of curiosity about the products of FAW Automobile. Everyone wants to know what their terminal products are like.

After all, just by seeing this, everyone has seen a lot of high-end equipment, and the reporters who wrote this article are really attentive.

Not only did he put the photos they took at Chenhua Automobile Factory in the article, but he also posted a lot of photos of foreign automobile factories, especially factories in Germany. Although these photos are also from foreign websites, everyone can at least make a clear comparison.

You should know that the products produced by other people's factories are either bmw or world-famous cars such as benz, and ours is an unknown domestic brand.

And we? This domestic brand uses equipment as high-end as internationally renowned brands. What a sincere company? A record of developing a universal boyfriend

In China, even if you take two state-owned enterprises at the leading level, you don’t have such equipment yet, let alone sincerity?

Everyone couldn't help but continue reading. The pictures of this article were interspersed with text introduction styles, and the comparison photos of famous foreign brands during factory production that were posted from time to time, which made everyone feel strange.

The production process of our unknown Chenhua Automobile Company does not seem to be much worse than that of Mercedes-Benz and BMW?

This is exactly the result that Li Zheng and Pan Xiang hoped for the most. This plan was made by their boss himself, and this was also a soft advertisement for Chenhua Automobile before the official opening of the Beijing Auto Show.

To be honest, Chinese people do not dislike domestic cars, but over the past few years, everyone has been heartbroken by the so-called domestic cars. First of all, the domestic cars that make everyone sad the most are the domestic red flag, which is known as the pride of the country.

It's just that the old Audi Yibai changed its trademark. Changing the trademark in this way is called a domestic act, but many people are very despised.

Then Geely and Chery entered the market. After these two products entered the market, although the prices of automobile products dropped significantly, they also hurt the Chinese people.

Your prices are cheap, but you can’t fool our consumers by relying on the quality of this product?

Every day, I either go to a gas station or a car repair shop. Who can bear it? So the impression of Chinese people on domestic cars gradually emerged, that is, they are cheap and have poor quality!

This is exactly what Li Yifan least wants to see, because first of all, their Chenhua products will definitely not be particularly cheap in terms of price, and secondly, their products are really of good quality.
Chapter completed!