Light weapons must be a series, including squad machine guns, assault rifles, and sniper rifles, to achieve the function of equipped with the entire frontline infantry.

Mhamad attaches great importance to these things. Now, he cannot make hasty decisions. It may be more appropriate to design weapons that are suitable for Pakistani use based on these weapons.

However, this is just a single-soldier weapon system, and the individual-soldier equipment includes quite a variety of types.

For example, the simplest clothes!

When soldiers were inspected, they wore dresses, and when they were fighting and training, they wore camouflage uniforms.

Ordinary camouflage uniforms are just various irregular camouflage blocks on the clothes. Now, although the camouflage uniforms developed by Pakistan also look like various camouflage blocks, these patterns are carefully designed. This is similar to later digital camouflage, which is a new camouflage uniform composed of "pixels".

The smooth edges of traditional camouflage, while the scattered and disordered digital camouflage is already somewhat similar to the Geely suit, and can adapt to hidden needs in a variety of environmental backgrounds, such as jungle, desert and urban areas and anti-jamming night vision equipment. Moreover, it also has the camouflage performance under infrared detection and night vision goggles.

After watching various light weapons, Mhamad saw this camouflage uniform in the research workshop later.

"We have processed dozens of patterns. After comparison, the patterns are now the most perfect, which is very suitable for the tropical monsoon climate here and a small number of subtropical, plateau, and desert climates." The person in charge said to Mhamad.

Mhamad nodded. This camouflage suit has met the requirements and can be put into military equipment and provide feedback on more opinions through military trials. It will be improved.

"Report to the President, this is our physical fitness suit." The person in charge continued: "These clothes are made of fast-drying fabrics, which can quickly dry after absorbing sweat."

Mhamad looked at these physical clothing. The upper body was made of digital camouflage vest and grass-green shorts on the lower body, which was also to allow soldiers to fight directly in vests without worrying about concealment. For this physical clothing, it is worn close to the body, and the most important thing is the choice of fabric. In later generations, the physical clothing of the Chinese army used chemical fiber clothes. The soldiers sweated a lot after exercise, and the clothes were wet and stuck on their bodies after absorbing sweat. This was very uncomfortable during combat. This definitely affected the mood of the battle.

Next to the physical suit, there are combat boots. These combat boots are divided into three categories. Standard boots, that is, infantry boots. This kind of boots use hard-soled nylon high waist, fast zippers on the sides, and good breathability. The nylon high waist cloth is waterproof. The price is relatively cheap and suitable for a large number of equipment.

Engineer boots are infantry boots with steel bottoms and steel toes, because they must strictly prevent them from being hit by boxes and other toes during work. If such boots are kicked, they can kick the opponent's leg bones off.

Pilot boots are boots worn by pilots. In fact, they are leather infantry boots. Once the plane catches fire, it will cause nylon to melt and stick to the skin, and the consequences are very serious.

Of course, there are other special equipment, such as special forces, paratroopers, and mountain troops, which may require some special combat boots such as special combat boots, paratrooper boots, and mountain boots. These are all improved based on standard boots.

There are gloves on the top of the boots, which are divided into two types. A pair of close-fitting leather gloves are used for shooting, and the index finger part is a semi-finger structure to facilitate soldiers to pull the trigger. There are also a pair of gloves that are wear-resistant and flame-retardant for rope drops, etc.

"President, our equipment is simply specially used for special forces." Musha Af, who was visiting the side, said.

The army's equipment is mainly large in number. If these things are rated to special forces, and all individual soldiers are allocated, the cost will be quite high.

"First of all, it will be equipped to the special forces, but in the future, it will be gradually equipped to the entire army." Mhamad said: "A good equipment can save the lives of soldiers on the battlefield. Compared with life, no matter how much investment it is, it is worth it. Not only these clothes, but also those things."

Mhamad pointed his fingers and followed the direction of Mhamad's hand. Mushahav could see a dummy. At this time, the dummy's body was wearing all kinds of equipment, in addition to wearing the clothes and boots he had just seen.

The combat vest, bulletproof insert, helmet, radio, goggles, and backpacks, look like a futuristic warrior in this era.

When going to the battlefield, soldiers need to wear combat vests outside the digital camouflage uniform. This combat vest can be stuffed into bulletproof inserts.

Musha Af still didn't know about bulletproof insertion boards, but he was excited to see the bulletproof insertion boards. The guards fought in Afghanistan with Mhamad and saw the power of the bulletproof insertion boards.

At the beginning, Mhamad picked up bulletproof armor on the Soviet female deer helicopter and transformed it into bulletproof inserts and placed them in front and behind. These bulletproof inserts saved Mhamad's life.

However, the bulletproof insertion board at that time used solid titanium alloy, and this thing was expensive and could not be carried by individual soldiers at all.

Therefore, after Mhamad became the president of Pakistan, he began to pay attention to individual devices, naturally including bulletproof inserts.

Bulletproof inserts have not been popular yet, but in later generations, Americans fought around the world, and no matter where they went, this thing was a standard equipment for individual soldiers.

The main devices of bulletproof insert plates are plates, which can be steel plates, alloys, ceramics, plastics, etc. Generally speaking, there are most ceramic plates. There are even rumors that two tiles, glued in the middle, can become bulletproof plates. The rumor terminator has also conducted experiments. As a result, pistol bullets can really block them, but rifle bullets... When the tiles behind are broken, the flying fragments are enough to kill people.

Now, Mhamad reached out and took out the bulletproof insert from it. It was a black ceramic plate. This is a special development. It is made from the Chinese technology, made of composite armor similar to the materials in tank armor. After many tests, a bulletproof insert was finally tested.

And on both sides of this insert board, there are Kevlar materials.

Kevlar Materials is an aramid fiber composite material developed by DuPont in the United States in the 1960s. It was called aramid 1414. In 1972, it was officially commercialized and registered the trademark of this product as kevlar. The models are divided into k29, k49, k49ap, etc.

This new material has low density, high strength, good toughness, high temperature resistance, easy to process and mold. Its strength is 5 times that of steel of the same quality, but its density is only one fifth of that of steel. When this material was invented, it was first used in military use.

However, the current Kevlar material is far from reaching the level of application in later generations. The important reason is technology and capital. Now, this material is still monopolized by the United States. With its good relationship with the United States, Pakistan has also introduced this aramid fiber and used it on both sides of the bulletproof insert to cover possible fragments.

As for the Kevlar used for helmets, Pakistan has no way to introduce them. After all, it took the Americans six years to use this material to make helmets, which met the secondary protection standards.

"What level can this bulletproof insertion plate reach?" Mhamad asked.

This thing is modern armor, which is related to the life safety of warriors. Pakistan has conflicts with India all year round, so this kind of equipment cannot be careless.

"It can withstand 7.62mm rifle bullets, but cannot block the steel core armor-piercing bullets. The disadvantage is that they are a bit heavy." said the person in charge.

Compared with the titanium alloy bulletproof insert plate made by Mhamad on the battlefield, the weight of this thing is almost twice as high.

"It seems that improvements need to be continued," Mhamad said. "I hope our scientific and technological workers will work harder and strive to produce better finished products."

"Yes." The person in charge replied excitedly.

In addition to bulletproof insertion board, the design of the combat vest is also very reasonable. It adopts the later American Ta series as the prototype. The abdomen can be mounted with up to six large AK magazine bags, each with 2 magazines or two bullet bags. There are also tactile horizontal strips on the waistband of the vest, which can be mounted with bayonets, kettles, three-stage folding engineer shovels, pistol magazine bags, grenade bags, and a leg bag is connected to the left belt. The two horizontal strips are fixed to the thighs, so you can put the pistol magazine.

Bags, grenade bags and some miscellaneous items, pistol holsters on the right leg, and a saddle bag can be hung on the right hip, split raincoat, gas mask, towel, toothbrush and toothpaste and a portable tableware. A medical bag and walkie-talkie bag are placed on the left chest pocket of the vest, and a U.S. L-shaped flashlight is hung on the right. There is a lle horizontal bar on the back, which can be mounted with water bags and drum trolley bags. It is large in size and can be used as a long-distance investigation backpack. There is a lifting strap on the upper end of the back to facilitate others to seek help from injured soldiers.

With the development of electronic technology in Pakistan, small walkie-talkies can be developed to cooperate in combat on the battlefield. Advanced means such as walkie-talkies can be used to facilitate command.

Behind the model is a large backpack, similar to the US military's aile backpack, which uses an outer aluminum alloy bracket. It can not only be backed by a backpack, but also a radio station or shell. Three large pockets can also be used to easily access items. The backpack contains three-day rations, individual tents, changing clothes, floor mats underneath, etc.
Chapter completed!