Han Xinghai is the only one left in the huge No. 5 repair workshop.

After Han Xinghai stopped everyone from leaving, he began to re-check the main control light brain of the repair workshop. When he was checking, he didn't know that a pair of eyes were staring at his every move through the holographic monitoring system.

XCMG.

After leaving the No. 5 maintenance workshop, XCMG immediately returned to the office and opened the No. 5 workshop monitoring system. When XCMG opened the monitoring system and saw Han Xinghai focusing on checking the main control light brain of the maintenance workshop, he was inexplicably excited. In his subconscious, XCMG hoped that Han Xinghai would perform well.

But what disappointed XCMG was that Han Xinghai checked the main control light brain of the repair workshop for a while and then left.

Did he give up?

Almost immediately, XCMG gave up thinking that Han Xinghai could not repair the dragon x-008 well.

XCMG waited for about ten minutes, but Han Xinghai did not return, so she left the office disappointed and soon started working and forgot Han Xinghai.

For XCMG, the chief engineer, he is too busy and cannot spend his time on this meaningless thing.

Han Xinghai did not give up, he just went to the cafeteria to have a meal.

Because combatants are constantly returning to the land warships, the canteen on the land warships is open all day and there is food at any time.

Han Xinghai worked for a day and a night, and did not feel hungry at work. Once he let go of his work, he immediately felt a strong sense of hunger.

After eating and drinking, Han Xinghai brought a lot of bread and drinks back to the No. 5 repair workshop and began his restoration project.

There is no doubt that this is a arduous and massive repair project.

Han Xinghai did not dismantle the mecha immediately, but cleaned the surrounding messy site clean and spotless. Then, through the holographic projection of the main control light brain, the maintenance workshop was divided into several areas. After completing all this, he began to dismantle the giant dragon x-008.

Han Xinghai's disassembly was very thorough. He removed the dragon x-008 in eight pieces, and hundreds of huge parts were placed in the area divided by holographic projection.

Soon, Han Xinghai was immersed in work and forgot time.

The giant dragon x-008 was dismantled into a dragon skeleton by the Korean Star Sea, like a giant skeleton.

During the dismantling, Han Xinghai discovered that the mecha had experienced an extremely tragic battle before it was abandoned. Many of the composite armors had been severely deformed and cracked, especially in the cockpit position, there was a crack that was two meters long, which had completely torn the cockpit and damaged the cockpit enclosure.

In addition to the serious damage to the composite armor, the keel skeleton has reached the limit of metal fatigue.

This mecha must have fought with some kind of beast.

Han Xinghai speculated from the traces of damage to the composite armor of the mecha, that this mecha had fought with beasts like the Mongol Dragon, because those traces could obviously be judged as the teeth and claw marks of the beast.

Han Xinghai’s work is very cumbersome. He first deals with the welding and reinforcement of the keel frame, and then starts to replace and arrange optical cables.

At this moment, Han Xinghai couldn't help but be glad that he had worked with Gao Yong. You should know that before the Nuwa mecha modification company, Han Xinghai had never arranged optical cables.

Of course, the gap between Han Xinghai and Gao Yong is huge. He only arranges optical paths and optical cables without modifying the program settings of the optical brain.

However, Han Xinghai had the ending queen to help him complete Gao Yong's work.

According to Han Xinghai's meaning, the optical brain on the dragon x-008 is already very old and can be replaced with a new optical brain. However, under the suggestion of the end queen's optical brain, Han Xinghai still did not move the main optical brain of the dragon x-008. It just cleaned up the dust for the optical brain, replaced the optical path optical cable and other accessories, and then assisted with the end queen's optical brain.

After arranging the optical path and optical cables, the giant dragon x-008 sensors with densely packed bodies began to be arranged.

Han Xinghai is a little incomprehensible about the dense sensors on the Dragon X-008. There are already many normal mechas with six sensors, while Dragon X-008 actually has more than 30 sensors. Han Xinghai believes that if you want to say that the mechas with the most sensors, it is the Dragon X-008.

In addition to sensors, the mecha's fire control system is also inconsistent with the original manufacturer.

This is a modified mecha!

Of course, Han Xinghai was not surprised. Usually, people who like to drive the mecha, Dragon x-008, are because this mecha has huge modification space. In fact, after Han Xinghai checked this mecha, he decided to modify the mecha instead of repairing the mecha.

There is a huge difference between repair and modification.

The so-called repair means that the technical parameters of the mecha meet the factory-qualified standards through maintenance, which basically uses original accessories. However, modification is different. The modification will change the original standards of the factory, and even make major modifications to some main structures and weapon systems.

In fact, when Han Xinghai searched this mecha, he immediately judged that it was impossible to completely repair this seriously damaged dragon x-008, because there were not enough spare parts on the land warship. After all, this itself is a main fighter mecha that has been abandoned for many years.

However, if the modification is modified, there will be no problem that cannot be repaired, because other spare parts can be replaced.

Han Xinghai didn't know that XCMG suddenly got angry because he was sure that it would not be able to repair it in four days, because XCMG racked her brains to make efforts to repair the mecha, but he found that it was impossible to completely repair it within a few days without spare parts.

Han Xinghai never thought about repairing it, but modifying it.

Of course, in the logic of Han Xinghai, repair and modification are the same, as long as the parameters can meet the combat standards.

Whether it is repair or modification, it is boring, but for Han Xinghai, it is full of fun...

...

When Han Xinghai arranged the optical cable, he found that the Dragon X-008 was equipped with sensors and modified it at the same time. Han Xinghai didn't know much about electronic devices such as sensors and scanning systems. However, a series of data feedback from the optical brain showed that the Dragon X-008's holographic scanning system must be very powerful, which is a kind of Han Xinghai's intuition. His intuition has always been very accurate.

What made Han Xinghai happy is that the transmission mechanism of Dragon x-008 is very perfect and does not require modification.

Han Xinghai replaced and modified. After completing all the debugging work, the last process for Dragon X-008 was started: armor reinforcement!

According to normal modification work, armor reinforcement is the easiest modification, but for Dragon X-008, it is the most difficult process, because there is no sample for Han Xinghai to imitate clones.

Han Xinghai actually didn't spend too much effort on the complex modification of electronic accessories such as optical path optical cables and sensors, because he only needed to change the device according to the original roadmap. This was familiar to Han Xinghai, who had worked in the Nuwa mecha modification factory. However, the armor reinforcement of the mecha is a professional knowledge that Han Xinghai never involved, because the armor usually uses original armor, and no one will spend a lot of effort to modify the armor on a large scale.

Han Xinghai once did some armor reinforcement work in a virtual laboratory, but this is completely different from reality. Moreover, the armor technology used in the seven major star fields is currently the most advanced dual-axis composite armor. Both manufacturing and assembly processes are essentially different from traditional homogeneous alloy armor, and the process requirements are more stringent.

Han Xinghai dared not take the armor's modification lightly, but strictly implemented it and completed the modification according to the strictest craftsmanship requirements of the seven major star fields.

In order to facilitate maintenance and replacement, the dual-axis composite armor used by Han Xinghai is all-metal, high-quality alloy, fiber metal mesh, and a special layer of stagnant temperature metal as the core. The welding process of this dual-axis composite armor is very fine. At this time, Han Xinghai couldn't help but be glad that he had the experience of modifying in the virtual modification room, otherwise, the armor modification alone would have made him blind.

The advantage of modifying the No. 5 maintenance workshop is that Han Xinghai can use all the resources on the land warship, because the light and brain authority of this maintenance workshop can control all the equipment carried on the warship. Han Xinghai naturally didn't know that the former of this No. 5 maintenance workshop was a private modification room created for himself by a senior general who liked to modify.

The original armor parameters of Dragon x-008 are seriously out of date in all aspects. The dual-axis composite armor used by Han Xinghai is an armor that has only been used in recent decades, and its resistance to strike has increased a lot.

For Han Xinghai, welding and strengthening the keel frame and laying optical cables are not technical tasks. The most troublesome thing is armor modification, because the armor of the military version of Dragon x-008 is very wrong with the armor parameters on the active mecha, which leads to a much greater difficulty in modification, and he has to spend a lot of effort and time cutting and welding armor.

The most complicated thing is that because it is composite armor, many welding processes cannot be used, but special deformations are required to make the armor reach a perfect fit and avoid destroying the composite armor's anti-strike ability.

What made Han Xinghai happy was that the equipment in this No. 5 repair workshop was extremely advanced and could fully meet his needs...

...

In the assembly of the dragon x-008, it revealed its true face little by little.

On the fourth day, Han Xinghai finally completed the cutting and welding task of the last piece of armor. When the last piece of armor was completed on the equipment, Han Xinghai didn't even have time to take a look and fell asleep on a huge piece of armor. He was too tired, and the fine welding process made him physically and mentally exhausted.

Not only does fine welding exhaust Han Xinghai, what makes Han Xinghai the most exhausted is moving some metal parts that can often be hundreds of kilograms or even tons.

The steel mecha that had dozens of tons were disassembled and installed with bare hands, and it was repeated over and over again, which was equivalent to the fact that in just three days, Han Xinghai moved hundreds of tons of metal.

In fact, there are various maintenance equipment in this repair workshop. Han Xinghai does not need to carry heavy spare parts with his bare hands. However, if the machine is used to carry it, it will be extremely time-consuming. You can imagine that if you want to assemble a piece of spare parts weighing hundreds of kilograms or even forward onto the mecha, you will first control or drive the equipment, then fix the spare parts, and then repeatedly test it, and then reset the equipment. Just completing this process is a waste of time.

Previously, Han Xinghai repaired twenty mechas a day and a night because he was more efficient with bare hands.

In many cases, the efficiency of machines is not necessarily higher than that of human hands, especially in the field of maintenance and modification, which requires the feeling of both hands, and it is not comparable to that of machines. This is why there are masters in the modification industry.

Now, Han Xinghai still has the last step - assembling armor.
Chapter completed!