Chapter 390 Anti-gravity aircraft, officially released! [Subscribe]

In the room, Bai Fan lay on the table.

There were piles of drafts in front of me, about 30 cm thick, placed in every corner of the table in turn, and mathematical operation symbols can be seen on it, densely packed.

At this moment,

To be honest, even if you pull a doctoral student in high-energy physics or applied mathematics, you have to look at the draft paper in front of you, and you don’t know what is depicting on it at all.

Bai Fan looked out the window and saw that it was still heavy snow, and the relevant level was even worse. Although he did not need to continue to deteriorate, it was not a big deal to keep it like this. The snow at the doorstep had to be cleaned every six hours, otherwise it would pile up to the knees.

And most importantly,

This is the case with Bai Fan’s hometown in the south, let alone some of the ones near the north.

Obviously, it will be worse.

"This blizzard just doesn't know when it will stop."

“It affects travel too much.”

"And.........it's much more serious than I thought."

Bai Fan sighed on his own, and at the same time, he opened the news and read some reports as usual.

It has been three days since he returned from Jinling today.

During these three days, in addition to communicating with Director Wang Sheng of the laboratory and further improving the relevant work on the original basis, he was the controllable nuclear fusion project at hand.

There was nothing else but eating and sleeping, so I plunged in.

Talking under the eyes, the center of the table,

There is a large drawing, placed upright on the table, and a circular device structure has been outlined with sketches.

The device structure occupies more than 80% of the drawings.

At first glance, its type looks like a large boiler with three tentacles stretched out.

No matter how you look at it, it's weird.

If Director Wang Sheng was here, he would definitely ask curiously:

"Bai Fan, what are you doing?"

"A new project?"

But now, Bai Fan is really doing his own thing alone, and there is no one around him who speaks.

"The central area is a vacuum chamber, followed by a coil... when powered on..."

"We must exert huge energy, constrain all these magnetic fields and conduct them in a single direction, which means that there must be no problems in the device structure, and that it must be fine and fine, and the channel settings are clever."

Thinking of this, Bai Fan took back his mind and continued to outline the drawings. While muttering to himself, he was very cautious in every stroke. He had a serious face and stared at him with his eyes straight, not daring to be careless at all. He was extremely serious, for fear of something wrong:

After a while, about ten minutes.

With the pen stopping,

Bai Fan stood up and stretched his waist, looking at the drawings in front of him with admiration, as if he was looking at a handicraft, and spoke happily.

“It’s basically that.”

"According to part of the information given by the system, this should be the type."

"A small part was finally completed."

"This design can achieve further miniaturization on the basis of the original."

"The miniaturization of this model is at least more than the current thirty years, and it is even more exaggerated. If it is exposed internationally, it will probably be another new storm. Scientists who study high-energy physics and Tokamak devices will have to be like seeing ghosts."

Bai Fan had a smile on his face and teased him a few words.

Yes, that's right.

On the drawings completed by Bai Fan in front of him, what is described is a very important device in the controllable nuclear fusion project - the Tokamak device.

The so-called tokamak device, in a common sense, is a ring container that uses magnetic constraints to achieve controllable nuclear fusion. Further explanation is to create deuterium and tritium to achieve fusion environment and ultra-high temperatures through magnetic constraint drive, and to achieve control of controllable nuclear fusion reactions.

Originated from the S-United States Moscow in the last century.

Compared with the traditionally large and heavy tokamak device.

This time, Bai Fan further extended the previous part of the design through the system information, and achieved a leap forward on the original basis, directly to miniaturization. In the size of the design, only one table is as big as the upper and lower part, with a maximum of no more than two cubic meters.

Bai Fan continued to look at it for a while, sat down again, and continued to outline the drawing just now.

Next,

He divides specific functional areas in it,

Just a rough idea.

I want to implement the miniaturized tokamak device in a truly sense.

Apply from paper to practical.

The process is not a little bit.

"The most important part of the 50% area in the middle is the vacuum chamber area, and next to it is the power supply system, which can directly use the latest produced new energy structure batteries as auxiliary power supply."

"Then it's the control system, just use current to control it."

Bai Fan touched his chin and judged himself:

"At least, there is no big problem with identity."

"If you use plasma control, you have to re-cut a functional area."

“Not cost-effective.”

Bai Fan shook his head and thought.

"There are also high-temperature resistant materials, which require the latest composite type."

"Otherwise, I can't bear the high temperature that comes up instantly."

The tokamak device has a circumferential magnetic field of generally 2~8T, which is a traditional design.

The current one,

It doubled directly from the original basis to reach 16T.

What is this concept?

In terms of functional output, its efficiency is not only doubled, it will be an increase in geometry.

However, there are undoubtedly higher requirements in terms of durability and requirements of the material.

It should be noted that under the conditions of high-power neutral beam injection heating and microwave heating, the effective combustion temperature will exceed 4.4×10K, which is far beyond the current material properties, which is also an important reason for reliability and fusion constraints.

Bai Fan’s current problem,

It is necessary to improve and deal with this problem under the current circumstances.

Just after Bai Fan further improved,

While studying the tokamak device.

Under the above arrangement, Kyoto Airport.

The first anti-gravity aircraft was newly released, and finally kicked off its first prelude to the eyes of the whole country and even the whole world, and was completely exposed to international attention.

[Just just now, the anti-gravity aircraft used by the anti-gravity engine independently developed by my country officially landed at Kyoto Airport and is currently parked at the end of Runway 1, according to the above arrangement.]

[Next, they will take over the original flight mission to alleviate the travel problems caused by climate reasons and complete transportation in blizzards. But what is the result? What can the cross-age anti-gravity engine technology perform in this harsh test? Let us wait and see and further get closer to our latest black technology...

In the news report,

One by one, reporters came to Kyoto Airport, regardless of the heavy snow floating in the sky.

Reporting conscientiously.

at the same time,

As soon as the news was released, the official launch of the anti-gravity aircraft has ushered in the attention of the whole world!

Explodes in an instant!
Chapter completed!