"It seems that the avalanche landed, we need to speed up..."

As Li Yifan said that, he took Ashin and Ah Xiong to speed up the speed and walked towards the production workshop behind.

Ah Xiong and Ashin also looked solemn. They were inside the building, not in the open area outside, and they could not see the damage to the building. Logically speaking, for safety, everyone should go to the open area outdoors to hide, but now the boss wants to go back and pick up cheap, what can they do? They can only follow them, after all, they all know the truth about wealth and honor in danger.

The three of them quickly entered the production workshop behind, which was specially responsible for the production of flagship high-end cameras under Nikon.

In fact, the most valuable things of these cameras are one of the lenses and the other is the electronic photosensitive elements inside, that is, high-end ccds or high-end ccs.

Although Li Yifan was also drooling at the equipment here, after all, these equipment could not be moved away in such a short time, so he could only watch and drool.

Before entering the production workshop, the first thing to enter is the dust removal room. Originally, outside visitors had to strictly require dust removal, but now there is no need. Several people passed the dust removal room in a swagger and then entered the core area of ​​the Nikon factory, the production and processing workshop.

The first workshop is specialized in producing some cameras or mechanical parts. You can see many large CNC machining centers placed in the workshop, with about fifty or sixty units in appearance. They are all high-end goods and neatly managed. Li Yifan roughly glanced at the nameplate of these machine tools. Many of them were high-end goods from Fanuc and Mazak, which are difficult to buy outside.

He was very interested, but he could only swallow his saliva. These machine tools are not small in size and are all precision goods. The requirements for installation and disassembly are very high. It is impossible for them to take these machining centers away today.

In the workshop behind, it is specialized in producing electronic robots. This is where Nikon produces robots for Honda. This is what he only knew when he saw the introduction of the exhibition hall in front. It turned out that Nikon could also produce robots. Just by this, he was saliva almost hanging his chest.

This is the high-end manufacturing industry. It’s a pity that I can’t take these things away. I can only watch those production lines swallow their saliva, but this does not prevent him from collecting information.

He photographed the layout of the production line, the mechanical nameplate and mechanical names on various production lines, etc. with a digital camera.

The original storage conditions in the camera storage card about the factory's periphery have long been deleted by him. Although he cannot obtain these mechanical equipment, as long as he can know the details here, these information alone will be worth tens of thousands of yuan.

You should know that even if you want to set up a machining center, how to layout, what kind of machinery to use, how to use it, how to do more than the production line, etc., these are all headaches, especially for a poor and innocent beginner like him. If you don’t have three to five years of exploration, you will not be able to figure out the tricks here.

And these so-called tricks are experience. Such experience will not be told by the machinery manufacturing companies in Germany and Japan.

And even if you want to spend money to learn from others, they won’t tell you. After all, how to layout this production line is all the experience that everyone has spent many years to explore. Don’t underestimate the placement of these machinery. Perhaps it is just such a simple arrangement that can improve the final production efficiency and yield by more than 10%. This is experience!

In his previous life, Li Yifan also followed some equipment production departments under the domestic assembly system to inspect. In name, he was purchasing foreign machinery production lines. In fact, the main purpose was to enter other people's production workshops to steal the masters. However, foreigners were also staring at the production workshops. Not to mention going in and steal the masters, they were difficult to even look at them from a distance. They would only lead them around in irrelevant places. At that time, the people who were assembled with the same purpose as him were very anxious.

Unexpectedly, when I arrived at Nikon's factory today, it seemed like I had entered Baoshan, and no one cared about it at all, so I wouldn't make good use of it.

Three people and three cameras took pictures of the two production workshops, and then searched through the offices in these production workshops, found many production manuals, and put them all in their pockets.

Don’t underestimate these oil-filled production manuals. This thing is equivalent to the martial arts secret book of the past. It contains detailed regulations on the process of producing various parts, how you should do it, how to supervise workers, etc.

If the arrangement of the previous production lines and the use of machinery were experience, then these production manuals were also valuable experience. The previous experience was aimed at machinery, and these experiences were aimed at workers.

These are all treasures, and then we entered the third production workshop. The third production workshop is for producing microscopes and lenses. Here we will enter Nikon's core technology area.

Just by looking at the workshop gate, you can tell the important surname here, because the large iron door of this workshop is much thicker than the iron door of the two workshops in front. If the workers hadn't had the workers running out in a panic and forgot to close the door, it would have been unlikely for them to come in.

Several people took photos again, and recorded the production line situation, and then found the raw tea manual. Finally, Li Yifan took a few small high-end microscopes. You should know that Japanese people are experts in this regard, and these things are still to be studied when they go back.

Those production manuals are good things, and the production process in them is absolutely good, but they cannot be better, because they record the sequence and steps of producing microscopes of many specifications, as well as the required error accuracy and other series of messages. This is equivalent to printing a booklet to tell you how to make these microscopes, and what else is more awesome than this?

The fourth workshop specializes in producing other parts of digital cameras. Li Yifan and others also took photos and recorded them, and then looked for production manuals.

Then we entered the fifth workshop, which is the top priority of Nikon, specializing in the production of high-end ccd and s sensing components, which are high-precision electronic photosensitive devices.

To put it bluntly, they are electronic chips. These things can be said to be the unique skills of Japan. Apart from the Germans, there is really no other country that can compete with them.

While Li Yifan asked Ah Xiong and Ah Xin to record and take photos, he came to the lithography machines that produced chips, carefully recorded the model of the machine, and then put several packaged chips in his arms, and then went to find the production manual.

After Ah Xiong and Ashin finished work, he reluctantly took the two into the sixth workshop below.

The sixth workshop is the assembly workshop. The components of the microscope or digital camera produced in front will be transported to the workshop through a conveyor belt, and then the assembly will begin after special processing.

After several people recorded the placement of the production line here and the machinery used in the workshop, they began to look for production manuals.

When he was recruiting the production manual, Li Yifan was also shocked. No wonder that the young Japanese was able to achieve such high attainments in the field of optoelectronics. Just by looking at their strict production standards, we can see how attentive they are.

After entering this workshop, all the camera components must be immersed in a special liquid to remove dust. He hurriedly asked Ah Xiong to find the liquid tank and then filled two bottles to take them back for research.

Then before assembly, before assembly, the sensors must be manually dusted under a microscope. This microscope is a special microscope with very high resolution accuracy. Even the lights used are very special ultraviolet lamps. Any dust over five microns on the sensor must be removed. This shows his intention. It is no wonder that he can look at the top in the field of photoelectricity. This effort alone is not comparable to us.

This time, Li Yifan opened his eyes and finally learned the secrets inside the factory, the rules and regulations, production processes, etc.

Otherwise, even if he founded the same company after he returned to China, even if he had the technology and machinery, it would be completely impossible to reach such a height in just a few years or even more than ten years.

This time, I came here right. After entering Baoshan, I finally didn't return empty-handed.

Even if you don’t get those machinery today, it’s enough to get these information and the internal situation of the factory.

After leaving the sixth workshop, they entered the last workshop No. 7, which was a newly built workshop with very new machinery and equipment.

Several people also recorded it, and then took out the production manual from the workshop office. When they saw the introduction of the production manual, Li Yifan's heart almost jumped out of his throat. This time it really made a fortune, because this workshop is actually the workshop that produces lithography machines...
Chapter completed!