Bilibili's backstage has been sending private messages.

Most of them are fans' urging them to update, and some technical parties inquire about the technical process.

There are also some invitations from various platforms, hoping to cooperate.

There are even several well-known brand parties.

Because Lu Cheng did not announce his contact information on the platform, they could only contact through private messages.

"It seems that a hit video has a greater influence than I thought." Lu Cheng couldn't help but sigh secretly.

He looked at the number of fans again.

In just half a day, the fans increased by another 100,000, and turned into 300,000!

The number of views also reached 1.5 million.

As for the technology point, it has increased by 1,000 again to 7,000 points.

but.

Lu Cheng knew that the video was recommended and exposed a few days ago, so there was a brief explosive growth.

After a few days, the popularity decreases, the number of views and fan growth will gradually stabilize.

Lu Cheng replied to some private messages and then devoted himself to the production of exoskeleton armor again.

Before, he only made mechanical limbs, a helmet, breastplate and the drive device behind him were not made.

With the robot knowledge learned from "Super Marines", you can enrich this unfinished part.

at the same time.

Lu Cheng also bought some materials needed to make 3D printers online.

Except for the special ink benzene tin that needs to be upgraded with technology points, the same or alternatives can be found in this world.

After two days of busy work, Lu Cheng finally made the breastplate of the mechanical exoskeleton.

After wearing it with mechanical limbs, it becomes even more cool and handsome.

A bit of a futuristic warrior!

However, Lu Cheng did not publish the video as soon as possible.

He is going to release all the equipment together after he finishes it.

This way, the effect will be more shocking.

In this way, ten days passed in a row.

Lu Cheng finally made a complete set of exoskeleton armor.

At the same time, the relevant materials for making 3D printers have been purchased one after another.

According to the relevant drawings in his mind, Lu Cheng began to assemble a 3D printer.

Build the framework, set the program, and polish the materials.

It took a full day to finally make the finished product!

This is a three-meter wide and five-meter high device.

The appearance is a bit similar to an ordinary printer, but it is much more complicated than an ordinary printer.

At the top is the material input port. After the material is put in, the system will undergo internal inspection and classify these materials and divide them into various areas!

Then, import the modeled 3D diagram and set the relevant scales and you can start printing.

The printed finished product will be slowly generated from the outlet made of special nanomaterials below!

If the height or width of the model exceeds the capacity of the 3D printer.

The 3D printer will print layer by layer according to modeling, and the rest will need to be assembled by itself.

certainly.

The width and height of the 3D printer can also be adjusted by yourself.

Because Lu Cheng only needs to print prosthetics now, there is no need to make the 3D printer too big.

"Try the effect."

Lu Cheng imported the 3D model inflatable doll of Teacher Tianhaiyi into the 3D printer.

Then, the relevant materials were put into the material port and the start button was pressed.

Tatta--

Soon, the 3D printer lighted up and began to print.

Five minutes later.

With a "ding" sound, the inflatable doll was slowly made from the outlet.

Lu Cheng opened the finished product warehouse, carried the inflatable doll out, and began to look carefully!

"It's so perfect, it's exactly the same as a real person." Lu Cheng was amazed.

The effect of 3D printers is amazing.

It perfectly reproduces every detail of Teacher Tianhaiyi.

The proportions of each item are also very accurate, which is almost the same as the modeling graphics.

It's like a heifer basking in the sun - awesome!

Once this product is launched, it will definitely be a blessing for otaku.

Those two-dimensional wives can appear almost perfectly in the real world through 3D printing!

No longer in fantasy.

"Ahem, Xi'er still can't see this thing." Lu Cheng coughed dryly.

He quickly placed the inflatable doll at the material port and pressed the factory reset button.

Soon, the inflatable doll was sent into a 3D printer.

After a moment, it became raw material again.

Of course, the content of the material has been reduced.

When making inflatable dolls just now, it was impossible to use all the materials.

Some excess materials will be sent into the scrap compartment of the 3D printer.

"Compared with exoskeleton armor, this is black technology!" Lu Cheng sighed secretly.

If this 3D printer technology is made public, it will definitely cause earth-shaking changes to the production and processing industry!

Not only can it perfectly replicate the modeling drawings, but it also has a very short production time.

"Ten days have passed, and it's time to publish the second video from the start of the series."

Lu Cheng placed the 3D printer in the garage and then began to produce and edit exoskeleton armor.

After ten days of fermentation.

The popularity of the video gradually decreased, and the final playback volume was frozen at more than 3 million.

The fans increased to 500,000.

A video that attracts 500,000 fans can be called a phenomenon!

After all, some up owners may not have the number of fans if they work hard to update for one or two years.

Lu Cheng looked at the number of views on other platforms. Although it was not as high as Bilibili, it also had a considerable number of views.

The total number of views on the entire network is almost over 10 million!

The corresponding increase of the technological points has also been 3,000 points.

However, because Lu Cheng used 2,000 technology points to make 3D printers, his current technology points are still only 7,000.

"It's really useless. You must earn some technology points as soon as possible. When the company is officially established, a 3D printer alone will definitely not be enough."

Lu Cheng did not delay any longer and began to devote himself to the production and editing of exoskeleton armor videos.

One day later.

The second video from the series from scratch was officially released.

The title is: From Scratch to the Complete Version of Bones Armor.

It was just sent out less than ten minutes.

The number of views quickly exceeded 10,000.

Barrages were also browsed.

"He is here, he finally comes with black technology!"

"Ah, this time it's the full version, and I'm worthy of being a conscientious upright."

"The hangup competition is coming, what hangup will be launched this time?!"

"I don't need any skills to do black technology, just cheat!"

Lu Cheng looked at the "Hangbi" subtitles on the screen a little confused, and immediately reacted.

A comment asked before what skills are needed to make exoskeleton armor, and he replied: No skills are needed, just cheat.

Unexpectedly, I was just played with it as a joke.

I have to say that the ability of netizens to take advantage of the situation is quite good.

However, after making a fuss, many netizens still put their attention back into the video after making jokes.
Chapter completed!