"You've even put your nose on the face!"

Hearing Chen Jinsong's words, Gao Shuchun finally exploded.

At the beginning, Gao Shuchun was a bit showing off his mind and wanted to teach people who were Pin Yi Machines what is a gold medal milling machine. Don’t think it’s amazing if you can get the order. With our Teng Machine workers, can you build a good milling machine?

When Chen Jinsong and him were stumbled on the process documents, Gao Shuchun felt a little unhappy. They were all workers, and no one knew the importance of process documents. Even for the Teng Machine, the factory regulations must be produced strictly in accordance with the process documents, and there is no public permission for workers to change the process requirements at will.

But the regulations are regulations. If there are too many rules and regulations in the factory, you are not a pink and tender worker who has just entered the factory for a few days. How can you hold a rule every day and be a treasure in your hand?

In the early years, China's industrial level was low. Some industrial products were already very good to be manufactured. How could we talk about strict process requirements? For example, a shaft should be turned, but when it comes to which part of the car first and which part of the car after, the feed volume is set to be the most efficient, and it can ensure the surface roughness requirements and reduce the wear of the turning tool. These are all knowledge that requires long-term accumulation. How could China have such accumulation in the past?

Therefore, in many enterprises, the preparation of process documents itself is not rigorous enough. Some workers find their own experiences more effective than process engineers. Therefore, factories acquiesced to and even encourage workers to make various innovations, as well as various operating methods named after workers. Some of these are indeed reasonable improvements, while others are at the expense of quality requirements for superficial time and effort.

Gao Shuchun's previous operation was a trick. He put the operations of using the same tool together and then replaced the knife, which saved the time of changing the tool. On the surface, there were advantages. But as Chen Jinsong said, sometimes, process engineers deliberately separated several operations. Although the number of times of changing the tool is increased, it can be used to improve the quality of the parts. In this case, if the workers modify the processing order without authorization, the engineers' design will be lost.

Gao Shuchun didn't think there was anything wrong with his approach, but he also knew that Chen Jinsong was serious about him by grasping this handle, and he was in the end. If Chen Jinsong changed to a more gentle attitude, and if Gao Shuchun didn't stand the mentality of Lin Yiji, this matter would actually be easier to solve. But Chen Jinsong is not a person who is good at communicating with others, and Gao Shuchun did have the mentality of looking down on Lin Yiji. It would be inevitable that the two of them would be rushing to speak out, and sparking it would be inevitable.

"What's going on?" Wen Jianmin, who was talking to the workers at the other end of the workshop, heard the movement here and ran over and asked the two at the same time.

"This master does not follow the craft requirements. I remind him that he will not listen." Chen Jinsong pointed at Gao Shuchun and complained to Wen Jianmin. Gao Shuchun is an employee of Teng Machinery, and Chen Jinsong has no management rights over him, so he can only file a complaint with Wen Jianmin.

"Xiao Gao, is there any such thing?" Wen Jianmin asked Gao Shuchun for verification.

"It was him who deliberately found fault." Gao Shuchun said angrily, and then briefly told Wen Jianmin about the incident. Of course, he had to emphasize that as a senior technician, he had a very good understanding of process issues. There were many unreasonable requirements in this process document. There were no problem in choosing a better solution.

"This..." Wen Jianmin was in a dilemma. If this job was Teng Ji's own job, he could speak no matter how he said. Even if he felt that Gao Shuchun was not handled properly, he could still propose "not to be an example", at least to give Gao Shuchun a buffer.

He was not a workshop director. He was an excellent technician back then and knew some craftsmanship problems. He knew that even if Gao Shuchun’s treatment method was wrong, it would not have much impact on the quality of the parts. It was a matter of turning a blind eye and letting Gao Shuchun make the parts behind him strictly according to the process requirements. It would be fine, but how big could it be?

But he was not able to decide the matter in front of him. Chen Jinsong was a person who was on the one hand, and this job was also a job. He bit him and said that the request of the one hand was like this. What could Wen Jianmin say?

Linyi Machine is a state-owned factory that is as famous as Teng Machine. Do you accuse Linyi Machine of its process documents of unreasonableness? Can people accept it? When Tang Zifeng sent Chen Jinsong and other members of Linyi Machinery, he said that although this batch of products were manufactured by Teng Machinery, they would be branded with Linyi Machinery in the future. If there is a quality problem, the face of Linyi Machinery will be lost. Therefore, all workers must strictly implement the production requirements of Linyi Machinery. If they cannot do this, don’t join in the fun.

The leaders and middle-level cadres of Teng Machinery disagree with this statement about Pin Yi Machinery. They have not produced machine tools. Even the technical level of Teng Machinery was still higher than Pin Yi Machinery. When is it your turn to ask for production requirements in front of us? Isn’t this a move to take the feathers as a commanding arrow?

But Chen Jinsong just took the chicken feather given by Tang Zifeng as a command arrow. He insisted that Gao Shuchun's approach was wrong. Half of the parts he had processed had to be used as waste, and Gao Shuchun's salary was deducted for this. Wen Jianmin really couldn't find any way to smooth things over.

"Director Chen, do you think this is OK? Master Gao is the best milling worker in our workshop. The parts he has processed by him have always been exempted from inspection in our factory. You said that he violated the process requirements, which may be just a misunderstanding, mainly because our workers in Teng Machine are not familiar with the process documents of your Pin Yi Machine.

"Now that the gear has been processed halfway, why don't Master Gao finish it first. Master Gao will be able to make the gears at the back strictly according to the craft requirements. What do you think?" Wen Jianmin said politely.

"no!"

"no!"

Chen Jinsong and Gao Shuchun said at the same time. After saying that, they each found that the other party was actually talking the same way they did, and couldn't help but stare at each other again.

Wen Jianmin was stunned. He looked at Gao Shuchun, then at Chen Jinsong, and finally spoke to Chen Jinsong first:

"Director Chen, what do you think is not possible?"

"Now, Master Gao did not make this gear according to the requirements of the process. According to our regulations on the first machine, we need to remove it first and listen to the opinions of the process. If the process feels that it can be done, we can continue to do it. If the process feels that it is not possible, it can only be regarded as waste." Chen Jinsonghu said with a face.

Just now, Gao Shuchun shouted "No" at the same time as him, which made him feel very angry. It was obviously you who did something wrong, your director was pleading for you, and you were still whining and saying that it was no, who did you really treat yourself?

"Isn't this necessary?" Wen Jianmin was also a little unhappy. He said, "Xiao Chen, I still know a little about craftsmanship. Xiao Gao didn't do it according to the craftsmanship requirements. It was his fault, but..."

"Why is it wrong for me!"

Before Wen Jianmin could tell the reason behind "but", Gao Shuchun stopped doing it. He stammered his neck and said, "This process file itself is redundant. I have been a milling worker for almost 20 years. I have not made ten thousand gears like this, and there are eight thousand. Which gear has problems? Why? When we came a new machine, we couldn't even make gears. We also had to teach us how to make gears?"

"Xiao Gao, you can't say that." Wen Jianmin sweated heavily.

At this time, many workers in the workshop had already surrounded him. When he heard Gao Shuchun's words, some even shouted "Okay", obviously not to be too serious. In the past few months, the factory has been discussing the merger of Linyi Machinery and Teng Machinery. Most workers have some grudges about Linyi Machinery. Now, seeing Gao Shuchun jump out to challenge Linyi Machinery, everyone naturally stood on Gao Shuchun's side with the mentality of helping their relatives and ignoring their care.

"In the past, how we produced the Teng machine was our own business. Now we have undertaken the production task of the Pin machine, so we have to do it according to their craft requirements. This is called... let the guest follow the host's wishes?" Wen Jianmin gritted his teeth and squeezed out an idiom.

"What a fool's guest, Director Wen, who is the master here and who is the guest here? This is our Teng Ji territory, why does such a southerner become the master?" Gao Shuchun pointed at Chen Jinsong and said disdainfully.

"Yes, this is Teng Machine, we are the masters of Teng Machine!" Someone shouted again. ::

"What are you trying to make a fuss!" Wen Jianmin shouted at everyone, then turned to Chen Jinsong and asked, "Director Chen, do you think there is still room for negotiation on this matter?"

"I don't have this power." Chen Jinsong shook his head, and the hostile gazes around him made him a little timid. But he would never dare to give up the craftsmanship requirements according to Teng Jiren's wishes, and he really did not have this power.

"I won't serve you anymore!" Gao Shuchun was completely angry by Chen Jinsong's attitude. He turned around, took off the half-processed gear from the machine tool, held it in his hand and shook it at Chen Jinsong, and said, "Didn't you say that the gears I made are scrap? Then just treat it as scrap. How much is this lump of iron worth? It's deducted directly from my salary! I'm not short of this little money!"

After saying that, he threw the gear into the scrap box beside him, then turned around and left, the posture was extremely cool.

"This..., why bother!" Wen Jianmin stamped his feet.

To be honest, Chen Jinsong's attitude made Wen Jianmin very uncomfortable, but Gao Shuchun's move completely pushed the matter to an uncontrollable situation. Wen Jianmin is the workshop director, and he cannot be as willing as Gao Shuchun, or he cannot be as willful as Gao Shuchun. The cooperation with Linyiji is the decision of the factory. He messed up this matter, how should he explain it to the factory?
Chapter completed!