In traditional machining, when facing this impact force, they can only rely on a solid bench and tough fixtures to resist this impact force.

The impact force will be transferred to the bench through the fixture, and then transmitted from the bench to the ground under your feet.

Then, through the ground, it is transmitted to the foundation made of sand below.

This foundation made of river sand also uses special processing technology to eliminate internal stress, and fixtures, so that the corresponding reaction force will not be generated, which will affect the processing accuracy.

Therefore, the entire processing process seems simple, but in fact, the requirements for preliminary preparations are very high and the requirements for the working environment are also very strict.

However, after watching the machining video of industrial robots circulating from within Starfire Technology, many researchers at XXX Institute felt that they were watching science fiction movies.

Because this looks so fantastic.

For example, the industrial robot uses two robot arms as fixtures, and the other robot is in front of it with a drill bit, drilling holes in the iron ingot.

During this process, the two arms as fixtures will constantly vibrate at different frequencies.

This is a subversion of the traditional machining concept, because the requirements of tradition and processing for stability can be said to be to the point of being nitpicking.

During the processing process, any slight tremor is not allowed.

But here, the two robotic arms are constantly trembling, and in this process, it is indeed very effective to resolve the huge impact caused by processing.

But how can you ensure the accuracy of your processing?

You should know that your workpiece moves back and forth, which will seriously affect the progress of the drill bit tool.

During traditional machining operations, the processing procedures designed by others will set the forward and backward strength of the tool.

For example, when the tool is processed on an iron ingot, the outer layer has been ground off by 0.3 cm in thickness.

Then, the automatic distance measuring device will set the tool's re-advance route, the speed, and even the strength according to the changes in the iron ingot.

This seems simple, but it is the most difficult part of industrial control software to design.

It is also something we have never understood thoroughly, because such a simple mechanical action combines high-end technologies such as industrial control and distance measurement.

So when you see that robot is flexible processing, your first impression is that this is just a liar.

How is this possible?

We don’t even understand hard processing. Which company is yours, and it has developed the flexible processing technology?

Isn't this nonsense?

During the processing process, your workpiece moves around. Everyone knows that this can effectively resolve the impact force brought by the drill bit.

But when your workpiece moves back and forth, how can you ensure that your drill bit can always work steadily according to the original established procedures and drill out the set cavity?

How do you control the speed, angle, and strength when your drill bit is moving forward?

How can you ensure the accuracy you want?

These are all the difficulties that need to be faced when processing flexiblely.

If you say that writing an ordinary industrial control software may require ten thousand lines of code.

However, writing such industrial control software that is adapted to flexible processing may require one million lines of code.

The most important thing is that you still have to constantly check and modify these codes during processing.

Not to mention now, no company in our country has the technical ability to write such software.

Just talk about the top foreign major industrial control software players, such as top companies like Siemens and Sap, who can't write such software!

Therefore, flexible processing has many advantages, such as compared with traditional hard machining, flexible processing can greatly reduce the processing cost.

Because benches, fixtures, and even tools do not require expensive special alloys.

Because the characteristics of flexible processing can resolve the impact force brought by processing.

Moreover, the requirements for processing environment are much lower than those for traditional hard processing environments.

So in terms of processing costs, that is great.

In addition, flexible processing can allow many workpieces that were previously unable to be formed at one time to be made directly in one step.

These not only save costs, but also greatly improve the performance of many mechanical equipment.

So everyone knows the benefits of flexible processing, but the difficulty is also great.

Even in the eyes of many people, with the current technical reserves, there is no possibility of flexible processing in the next few decades.

Because this processing technology has too high requirements for distance measurement and industrial control software.

But now, when everyone saw with their own eyes that Xinghuo Technology had created an industrial robot, and began to stretch the robotic arms in front of everyone, and did gymnastics-like exercises.

All the researchers present were shocked.

Damn, why does this look so much like Zen Star Technology?

No matter how you look at it, it looks like alien technology, not like the invention of Earthlings!

Then a scene that surprised everyone even more happened.

Mr. Hu asked someone to take out an iron square and throw it over the machine tool. What surprised everyone was that when the square fell, it was actually caught by two arms.

Afterwards, something even more surprising happened.

Another robot arm, with a knife in his hand, came up to meet him.

The long drill bit rotates rapidly, but this time the mechanical arm at the end of the tool is fixed.

The other two robotic arms were holding the iron block and constantly spinning around the knife head.

Cremation splashed everywhere, and there was a constant sound of harsh metal friction in the room, and there was a strange smell of metal friction in my eyes floating in the laboratory.

But even in such a bad environment, the group of people in front of the machine tool were fascinated by it.

This picture is really shocking. It can be said that the robot operated by Mr. Hu has opened up a brand new world for them today.

It turns out that machining can still be played like this?

I used to use machine tools to fix the workpieces and then use tools to complete various punching, turning, milling and grinding processing operations on the workpieces.

But now, this machine tool can still be used like this.

They fixed the tool, then used a robotic arm to control the workpiece, constantly rotated on the knife head, and processed...

After a moment of sight, a square piece of iron was processed into a large round iron ball.

Although this workpiece is not very outstanding, everyone who has seen the entire processing process knows the difficulty of processing contained in this processing process.

This is so amazing!

Even when the machine tool completed its last action, all the researchers on the scene were filled with joy, and some even slapped them.

Because everyone understands that after having this thing, our H Country Military Industry really stood up this time.

The spring of our H country's military industry is really here this time!

In the past, our military products were the most troublesome parts.

The first is materials, the second is precision processing, and the third is equipment manufacturing!

In terms of materials, you can't hurry up, you can only explore, experiment, and learn...

In the past, we could only rely on the channels of Rui S and Jie K to support the finishing process.

Although I can't get too many high-precision machine tools, I can finally get some quenching my thirst.

Otherwise, you think, why did we not react after the UBS incident two years ago and let them continue to make money here?

This is all because of the reason, this channel cannot be cut off...

But now that we have this equipment, we no longer have to look at the faces of Europeans.

You can even say to them directly: Go!

With such a machine tool, many of our problems can be solved easily.

The happiest thing is that the equipment manufacturing industry will achieve great improvement.

Many people may not know what this equipment manufacturing industry is.

Simply put, this thing is the level that we have always wanted to upgrade but can never be upgraded.

To put it bluntly, Siemens, General Electric, Japan's Panasonic and Toshiba all belong to this ranks.

The reason why citizens of developed countries can do nothing and enjoy high benefits is because they have many such enterprises in their country that support their national economy.

To put it bluntly, you can produce products, but you cannot produce tools to produce products.

For example, we can now produce cars, tablets, TVs and other products.

But the production lines you use to produce cars, such as roller presses, automatic welding robots, automatic painting and other equipment.

You are imported from Swedish ABB.

There are also the ones you produce computers, packaging machines, integrated circuit film compressors, etc. These equipment and production lines are also imported from abroad.

There are also dust-free workshops, automatic panel packaging equipment, etc. used when producing TVs, which are also imported from abroad.

This is the equipment manufacturing industry, and it is also the weakest link in our industrial link at present.

Because of these equipment, robots, etc., we don’t know the principles, but we are just trapped in the problem of processing accuracy and cannot be produced.

For example, the most commonly used bearings, ball bearings, or gear bearings in the equipment manufacturing industry.

These are very high in processing accuracy, because only when the accuracy of these equipment parts is high enough, the accuracy can be high enough when you use the products they produce.

This requires very high precision processing, and this aspect can be said to be the biggest shortcoming that has hindered us from making breakthroughs in this field.

Now, this shortcoming has been filled by the industrial intelligent robots of Xinghuo Technology that emerged!

With this machine tool in front of us, it can be said that our domestic equipment manufacturing industry will usher in extremely earth-shaking changes.

This industry upgrade will definitely not be empty talk in the future...
Chapter completed!