Now that we have this equipment, we can say that we are completely taking a different approach and directly bypassing the barriers set by the three companies of the United States, Japan and Germany.

In the field of precision machining, we have made breakthroughs, and we only need to catch up with the material aspect.

To be honest, the field of materials is not the military level.

In fact, in the ordinary civilian level field, the gap between us and the United States, Japan and Germany is not particularly large.

At this time, the machine tool had basically completed the processing of the workpiece.

"Ba, bha, bha!"

From the silence, a burst of applause suddenly rang out like thunder.

Huang Haibin slapped excitedly and looked around him. Almost all the entrepreneurs who came with him looked very excited at this time.

Some of them even have weak emotional control ability, their eyes are red at this time.

Most of them have studied in the United States.

Moreover, many people have worked in American laboratories or R&D institutions.

They know the best how big the technology gap between us and the Americans is.

Let’s talk about why many international students who go to the United States choose to stay in the United States instead of returning to China.

There are too few opportunities to produce results in the country.

Then why are there few opportunities to produce results in China?

Is it because of the poor domestic scientific research environment? This is only a software reason, and more of the reason is in the hardware.

For example, if you have a sudden idea on this day and have a creativity, and in order to verify the feasibility of your creativity, you have to conduct an experiment.

But because no one has done this experiment before, and this experiment was designed from beginning to end.

During this experiment, many high-end experimental equipment may be involved.

And these equipment is very sufficient in the United States laboratories.

It can be said that as long as you apply, you can use it in a few days, or even use it multiple times.

And in domestic laboratories, haha!

If you want to apply for an experiment, you have to submit your application. If you have this kind of equipment, you may have to schedule a schedule.

Because in front of you, there may be several experimental teams waiting to use this equipment.

When it's your turn, the daylily may be cold.

In addition, if there is no equipment, then if your superiors also recognize your creativity, then they will approve the funds with one wave of their hand.

Allow you to buy the experimental equipment you need.

If there is no equipment you need on the market, then it will approve you to use the laboratory machine tool to process the equipment you need yourself.

That’s right, many laboratories in the United States have such processing equipment, whether it is our scarce high-precision five-axis linkage machine tools or the latest top 3D printing equipment.

Everyone has everything and will update the equipment every year.

Because people know that the principle that one must first sharpen one's tools when it comes to being good at sharpening one's work.

On the other hand, we, haha, a device costs several million, and it is impossible for the institute to buy such a device just because of your creative needs.

And many equipment do not have one, and even if you design the drawings yourself, you can't produce them.

Because there are no machine tools in the laboratory, it is impossible for you to specifically process the equipment you envision for the experiment according to your own ideas.

But it's OK in the United States.

So someone has conducted an assessment. The opportunity for scientific research personnel to produce results in the United States is three times that of domestic.

This is also the main reason why many scientific researchers are reluctant to return to China as soon as they go abroad.

There is really a gap between our scientific research environment and others, not only in terms of software, but also in terms of hardware.

Now, when everyone saw the flexible processing equipment in front of them, they finally heard it in their hearts.

With this equipment, we can be willful.

When doing experiments in the future, if we encounter equipment that we cannot buy, we can also design and produce special experimental equipment ourselves.

After all, the cost of self-development and self-made production is definitely much cheaper than the cost of purchasing special equipment from abroad.

The most important thing is that it saves time by producing it yourself.

"Are you still satisfied with our Tiangong Type 1?"

Just as everyone was so excited about the machine tool in front of them that it was difficult to extricate themselves, a magnetic voice suddenly came to everyone.

Only then did everyone see that a tall, thin man with a big beard appeared next to everyone at some point.

His hair was messy, his beard on his face had not been shaved for many days, and he had a plaid shirt on his upper body and a pair of jeans on his lower body.

The whole person looks very sloppy, but for some reason, everyone doesn't feel very annoying.

Because everyone smelled a similar breath from this person, he must be a crazy science and engineering man.

“Haha, very satisfied.”

"It's really shocking. We actually have such awesome equipment."

"Really, this is definitely an epoch-making product!"

"With him, it means we will have stronger planes and more awesome submarines in the future..."

Everyone started talking nonsense, although they didn't know who this person was.

But everyone is not stupid. When everyone entered the factory area of ​​Xinghuo Technology, the company's security requirements were so strict that everyone saw it.

But this guy is able to appear here in a big way, which means that this guy has a very good status in Xinghuo Technology.

Sure enough, at the moment when everyone was talking, the representative of the Quanye Fund, who had been with them, also stood up with a smile.

"I'll introduce it to you. This is Mr. Hu, the CTO of Xinghuo Technology!"

"Mr. Hu is also a crazy high-tech enthusiast, and he should have a lot of common languages ​​with you."

"If you have any problems or problems that cannot be solved, you can discuss with Mr. Hu. Maybe Mr. Hu can provide you with a perfect solution!"

This means that as soon as this is said, the entrepreneurs on the scene immediately became restless.

The CTO of Spark Technology, this is definitely a big shot in the field of technology!

No wonder he asked that before. At this time, everyone's curiosity about Tiangong No. 1 could no longer be suppressed.

"What is our equipment? Is it a machine tool?"

“Did he adopt the flexible processing concept?”

"His ability should be more than that, right?"

For a time, all kinds of talkative questions were constantly raised.

At this time, Mr. Hu also smiled and answered everyone one by one.

"Yes, from a conceptual perspective, this is also a processing machine tool."

"And what he adopted is indeed the concept of flexible processing. I think everyone should understand the benefits of this flexible processing."

"It greatly reduces the material requirements compared to the ordinary five-axis linkage machine tools now, and the processing accuracy is no weaker than the top-notch machine tools on the market."

"Our processing accuracy can even be controlled by X-wire..."

As soon as this data was reported, everyone present couldn't help but take a breath.

This data can definitely be called military level.

I'm afraid even the top Japanese and German processing companies use machine tools at this level.

"And our machine tool is divided into several types, which can solve various processing problems..."

As we all know, five-axis linkage machine tools are divided into three major categories: vertical, horizontal, and cradle-type.

These machine tools also meet various workpiece needs.

Vertical machine tools mainly process workpieces used on large mechanical equipment, such as large workpieces used on cranes, cranes, and even aircraft and ships.

Horizontal machine tools are mainly used to process small workpieces, such as car engine crankshafts, valve chamber cover pads, small motors and other industrial equipment.

The cradle-type machine tool is awesome. It is mainly used for S-shaped processing, mainly used for processing irregular metal workpieces.

These metal workpieces are mainly turbofan blades of turbochargers, or S-shaped metal blades, etc.

The value of these metal workpieces is often very expensive.

In order to process different metal workpieces, these machine tools often adopt different designs, ranging from shape to principle.

And the prices of unsold are also different, especially the last one is the most expensive.

But for Tiangong No. 1, he does not have such trouble.

Because the robot arm is flexible and fixed, the robot arm can continuously adjust the angle of the workpiece during the processing process to facilitate the tool to process the workpiece.

Therefore, in the past, it was necessary to design a machine tool to meet the processing conditions.
To be continued...